6206-2RS Sealed Deep Groove Ball Bearing
6206-2RS is a sealed single-row bearing with a 30 mm bore, 62 mm outside diameter, and 16 mm width. Request a bulk quote with your quantity, destination, and required suffix.
Request a quote ↓
| mm | in (≈) | |
|---|---|---|
| Bore | 30 | 1.181 |
| Outside diameter | 62 | 2.441 |
| Width | 16 | 0.630 |
| Closure | Contact seals on both sides | |
Dimensions are nominal. Inch values are rounded conversions.
Manufacturer reference data
The JTEKT 6206 2RS catalog lists a reference mass of 199 g and a limiting speed of 7,000 rpm with grease. Use the datasheet for the exact brand and suffix in your quote.
How to check a 6206-2RS replacement
Verify the 30 mm bore, 62 mm outside diameter and 16 mm width. For a mounted replacement, check the shaft shoulder, housing shoulder and corner fillet against the proposed brand’s mounting dimensions. Match the full suffix and approved clearance before ordering.
6206-2RS vs. 6205-2RS
The 6205-2RS is 25 × 52 × 15 mm. The 6206-2RS is 30 × 62 × 16 mm. All three dimensions differ, so use the original part marking and drawing to select the correct size.
Can a 6306-2RS replace a 6206-2RS?
The two reference sizes share a 30 mm bore, but the 6306-2RS measures 30 × 72 × 19 mm. Verify housing diameter and width before evaluating load, speed or seal compatibility.
For maintenance stock, say whether all pieces must ship together or a split shipment would work. If your drawing specifies a brand or clearance, include the complete marking. For equivalent parts, list the accepted brands and any required inspection documents.
| 6206 | Open |
|---|---|
| 6206-ZZ | Shields on both sides |
| Part number | Bore × Outside diameter × Width |
|---|---|
| 6006-2RS | 30 × 55 × 13 mm |
| 6306-2RS | 30 × 72 × 19 mm |